Do-it-yourself Acrylic Frames | How to Make & Hang Your 3D Artwork


Looking for a way to jazz up your wall artwork? Try out generating your very own Do it yourself acrylic frames for individualized 3D artwork. This put up will wander you by way of precisely how I built these in my property.




If you are looking for a custom made way to frame your shots or artwork to make it stand out from the wall, these Do it yourself acrylic frames are the best matter.



I landed on these frames since I wanted a little some thing to increase a very little extra pizzazz to my rest room wall.&nbsp



We made the decision to include my husband&rsquos like of golf into the blend by printing photos he took of PGA golfing classes he&rsquos performed in black and white.



I adore when artwork is a discussion piece, so this was the perfect addition to the toilet wall.



To make it actually stand out, I built these Do-it-yourself acrylic frames for each of the photos.



Listed here are the ways I took&hellip&nbsp



Table OF CONTENTS




  • one. Obtain your components.

  • two. Tape each and every facet of each corner.

  • 3. Mark in which you want to drill your holes.

  • 4. Drill your holes.

  • 5. Use your glue dots to secure your images to the frame.

  • six. Mark the full on the wall wherever you strategy to cling it.

  • seven. Use your punch tool to mark the entire on the wall.

  • eight. Drill your holes in the wall.

  • nine. Screw the standoffs into the wall.

  • 10. Connect your body to the standoffs.

  • eleven. Revel in the finished solution!



Disclaimer: This post does include things like affiliate hyperlinks for your ease. This is at NO added price to you but earns me a modest fee. To browse far more, verify out our&nbspdisclosure plan.



one. Collect YOUR Materials.



Initially factors initially, get all your resources. All resources for all the things I used are joined under. I also incorporated a record with inbound links of what we utilized to dangle the frames, way too.&nbsp



FOR Producing THE Do it yourself ACRYLIC FRAMES:




  • Plexiglass/Acrylic Sheets

  • Standoffs

  • Glue Dots

  • Piece of Lined Paper

  • Drill&nbsp

  • Drill Bits&nbsp(a person for the dimensions of the opening of your standoffs and a person for the screw for the wall)

  • Painter&rsquos Tape

  • Ruler

  • Marking Instrument (I utilized a Sharpie)



FOR HANGING THE Do it yourself ACRYLIC FRAMES:




  • Pencil

  • Handheld Amount

  • Punch

  • Screwdriver



2. TAPE Every Facet OF Each CORNER.



Plexiglass/acrylic is very fragile.



Simply because of this, you have to be quite careful when you are drilling the holes.



Positioning a piece of painter&rsquos tape on both facet wherever you system to drill your hole will enable keep the acrylic sheet from breaking or cracking when you drill.



I also kept the protective include on every single facet of the piece, far too.



3. MARK Where YOU WANT TO DRILL YOUR HOLES.



After you have put the painter&rsquos tape on all four sides (or having said that a lot of areas you approach to drill a gap), you can position a mark of where you want to drill your hole.



I drilled my holes 1&Prime in from just about every edge as you can see from the image above.



four. DRILL YOUR HOLES.



Ahead of really drilling, double and triple check that your marks are degree both equally horizontally and vertically.



You&rsquoll want to have these amount for when you hold them.&nbsp



The drill bit you opt for need to be significant sufficient to let the standoff to fit in the gap.



I would do a take a look at operate on a piece of scrap materials to make positive it is massive plenty of.&nbsp



At the time you are certain that the marking are amount and the bit is huge sufficient, you want to start out drilling.




Below is a great video clip to observe if you would like a demonstration on&nbsphow to drill through acrylic.



You want to use about 50 % electrical power when you are drilling.



Gradual and steady. If you go to speedy, the acrylic will crack, so take your time.



As you drill you should see spirals of the acrylic slowly but surely becoming taken out.&nbsp



Repeat the drilling for just about every hole you need to have.



five. Read More Here Protected YOUR Pics TO THE Body.



Once your holes are designed, you can increase your photo to the piece of acrylic/frame.



The key listed here is to once more, make sure your picture is stage right before you fully safe it to the frame.



The glue dots are really sticky and don&rsquot let for a ton of wiggle room, so it could be a excellent thought to line up a piece of lined paper driving the frame to aid you line the edges of your photograph.



Regardless of what trick performs for you to make confident the image gets glued to the body stage will do.&nbsp



6. MARK THE Total ON THE WALL In which YOU Strategy TO Dangle IT.



As you start out to hold, mark your holes on the wall, but make absolutely sure your body is degree.



If you measured the right way in the stage right before drilling, the holes on your frame ought to previously be level.



If you are hanging more than a person frame like I did, make sure each body is level in your grid, also.&nbsp



7. USE YOUR PUNCH Instrument TO MARK THE Full ON THE WALL.



I adore this software so much because it will get your hole began and makes it possible for your drill to stay in put when you commence drilling.



If you don&rsquot have 1, I highly advise it!



8. DRILL YOUR HOLES IN THE WALL.



Be absolutely sure to use a little bit that suits the screws that came together with your standoffs.



This will most possible be a smaller little bit than the just one you applied on the frames.



I also used a stud finder to see if I desired drywall anchors, but because these frames are not that weighty, you could most likely do devoid of them.



9. SCREW THE STANDOFFS INTO THE WALL.



As soon as you invest in your standoffs, you&rsquoll see how they perform.



In buy for the photograph to &ldquostand off&rdquo the wall, you have to secure the standoff with the furnished screw before attaching the image to the standoffs.



As you can see from the photo, creating guaranteed every little thing is degree and measured effectively is tremendous critical.&nbsp



10. Attach YOUR Body TO THE STANDOFFS.



Once you&rsquove hooked up the standoffs, it&rsquos time to attach the pictures!



Line up the standoffs with your drilled holes and safe the standoffs.



If all goes nicely, every little thing will line up appropriately and be completely ready to go!



If you are like my father and I, you&rsquoll come across at the very least 1 that doesn&rsquot line up perfectly.



For this, we cheated a minor little bit and secured the standoff to the frame and used a glue dot to protected it to the wall, so it didn&rsquot transfer.



We only had to do this for two corners of two frames, but don&rsquot get worried if you mess up one particular&hellip We&rsquove been there!&nbsp



eleven. REVEL IN THE Completed Solution!



Now it&rsquos time to love your get the job done!



We did a grid of nine overall photographs which was a huge endeavor with all the measuring, but I&rsquom in enjoy with how it turned out.



Allow me know in the feedback what you assume of the concluded solution!


Leave a Reply

Your email address will not be published. Required fields are marked *